Recommendation 2: Shangyi self-propelled aerial work vehicle
Shangyi Self-Propelled Aerial Work Vehicle 20 Han Shenghua; Liu Limei; Qin Shoudong; Chen Jie; Liu Aihua;; Electric Submersible Screw Pump Technology and Application [J]; Oil and Gas Field Surface Engineering; 2009 Issue 04
Working principle: when it is necessary to ascend, push the ascending vehicle to move, the person stands on platform 22, if the weight of the person exceeds a certain degree, then block 26 will press switch 15, that is, press switch 15, control cylinder 6 to extend, drive fixed plate 27 to move downwards to the ground, which can make the ascending vehicle difficult to tilt and fall to the right under the gravity of the person. When the weight of the person does not exceed a certain degree, switch 15 is not pressed. Then press the second switch 23, control the second cylinder 13 to extend, and the rack 16 moves downwards. The rack 16 drives the gear 17 to reverse, and the gear 17 drives the second shaft 18 to reverse. The second shaft 18 drives the second bevel 9 to reverse, and the second bevel 9 drives the bevel 8 to reverse. The screw 19 rotates accordingly, and the nut 20 moves upwards. The nut 20 drives the platform 22 and the person standing on the platform 22 to move upwards. When the platform 22 with the person reaches the required height, the second cylinder 13 is controlled to stop extending. When the person needs to come down from a high place, press the third switch 28, control the second cylinder 13 to shorten, the rack 16 moves upwards, rack 16 drives gear 17 to rotate forward, the gear 17 drives the second shaft 18 to rotate forward, the second shaft 18 drives the second bevel 9 to rotate forward, and the second bevel 9 drives the bevel 8 to rotate forward. Screw 19 rotates accordingly, and nut 20 moves downwards. The nut 20 drives the platform 22 and the person standing on the platform 22 to move downwards. When the platform 22 reaches the bottom plate 1, the second cylinder 13 is controlled to stop shortening. Then, the person steps out of the platform 22, and the placement plate 24 moves upwards to reset. If cylinder 6 is in an extended state, manually control cylinder 6 to shorten and reset.
3 Wen Juan; Industrial Design- "Green Design" Prevails [N]; Private Economy Daily; 2007
7 Zhu Yi;; Strengthen Energy Measurement and Supervision to Serve the Construction of a Conservation-Oriented Society [A]; Proceedings of the "Energy Measurement and Energy Saving and Emission Reduction" Forum in Jiangsu Province [C]; 2010
1 Wu Shengdi, Chairman of Hangzhou Aichi Engineering Vehicle Co., Ltd.; Many Environmental Issues in the Aerial Work Vehicle Market [N]; China Automotive News; 2002
Service Hotline: 13368025570 Dongguan Luxin is a professional manufacturer of hydraulic lifting platforms and lifting platforms, with mature technology and strong strength, and has received widespread praise. Welcome to join and purchase! Welcome to inquire and order by phone. XHZ5042JGKT6 aerial work vehicle is a folding arm aerial work vehicle developed by Xuzhou Hailunzhe Special Vehicle Co., Ltd. based on absorbing advanced technology at home and abroad. Under the premise of fully considering the advantages and disadvantages of existing folding arm products at home and abroad and customer needs, the product is finely designed and realized the complete upgrading of the product in appearance, operational performance, safety performance and other aspects. It is your ideal, safe, and comfortable solution for high-altitude operations.
1 Wu Shengdi, Chairman of Hangzhou Aichi Engineering Vehicle Co., Ltd.; Many Environmental Issues in the Aerial Work Vehicle Market [N]; China Automotive News; 2002